DJI FPV (first-person view) is a new and exciting drone technology that allows you to experience a truly immersive flying experience. If you’ve just purchased a DJI FPV drone and you’re wondering how to start it up, then you’re in the right place. In this article, we’ll guide you through the process of starting up your DJI FPV drone, step-by-step.
Step 1: Charge the Drone Battery
The first step to starting your DJI FPV drone is to ensure that the battery is fully charged. Connect the battery to a charging unit, and allow it to charge until the indicator light turns green. It’s essential to have a fully charged battery to ensure a successful and safe flight.
Step 2: Turn On the Controller
Before you can start your DJI FPV drone, you’ll need to turn on the controller. To do this, hold down the power button until the controller beeps and the lights start flashing. You can now release the power button, and the controller should be turned on.
Step 3: Power Up the Goggles
Next, you’ll need to power up the goggles. To do this, press and hold the power button until the DJI logo appears on the screen. Release the power button, and the goggles should be turned on.
Step 4: Connect the Goggles to the Controller
Once you’ve powered up the goggles, you’ll need to connect them to the controller. To do this, turn on the controller and then press and hold the “Fn” button on the controller. While holding the “Fn” button, press the “C1” button on the goggles. The controller and goggles should now be connected.
Step 5: Connect the Drone to the Controller
The final step is to connect the drone to the controller. To do this, turn on the drone by pressing the power button once and then quickly pressing it again and holding it down. The drone lights will flash rapidly, indicating that it’s ready to be connected. On the controller, press the “Link” button once, and the controller will start searching for the drone. When the drone and controller are connected, the lights on both devices will turn solid.
Step 6: Calibration
After the drone and controller are connected, it’s essential to calibrate the drone. Calibrating the drone ensures that it’s stable and will fly accurately. To calibrate the drone, place it on a flat surface and follow the on-screen instructions on the goggles. The calibration process may take a few minutes, but it’s necessary for a safe and successful flight.
Step 7: Take Off
Once the calibration process is complete, you’re ready to take off. To do this, use the controller to increase the throttle, and the drone will start to lift off the ground. Use the joystick on the controller to control the direction and altitude of the drone. Ensure that you
In conclusion, starting up a DJI FPV drone is a relatively straightforward process. Ensure that you follow the steps outlined above and always fly the drone in a safe and responsible manner. Remember to check the drone’s battery levels regularly, and always fly within the drone’s range limits. With the right preparation and knowledge, you’ll be able to enjoy the full benefits of your DJI FPV drone.