How to take off DJI FPV?

DJI FPV is a first-person view drone that offers an immersive flying experience. Taking off with DJI FPV is a simple process that can be completed in just a few steps. In this article, we will guide you through the steps to take off your DJI FPV drone safely and properly.

Step 1: Check the Battery Level

Before taking off with your DJI FPV drone, it is important to check the battery level. Make sure that the battery is sufficiently charged before taking off. The DJI FPV’s battery level can be checked using the DJI Fly app or by pressing the power button on the battery itself.

Step 2: Install the Propellers

The next step is to install the propellers onto the DJI FPV drone. The propellers are marked with letters to indicate which direction they should be installed in. Make sure to install the propellers in the correct direction to ensure proper flight performance.

Step 3: Turn on the Drone

To turn on the DJI FPV drone, press and hold the power button located on the top of the battery. The LED lights on the battery will light up to indicate that the drone is turning on. Keep holding the button until the LED lights start flashing rapidly, which indicates that the drone is ready to fly.

Step 4: Connect to the DJI Fly App

Once the DJI FPV drone is turned on, the next step is to connect it to the DJI Fly app. The app is available for both iOS and Android devices and can be downloaded from the app store. Connect your smartphone to the drone’s Wi-Fi network, which should appear as “DJI FPV-XXXX” (where XXXX is the last four digits of the drone’s serial number). Once connected, open the DJI Fly app to start flying your drone.

Step 5: Arm the Motors

To arm the motors of your DJI FPV drone, move both joysticks to the bottom corners of the remote controller. This will activate the motors and prepare the drone for takeoff. Make sure that the area around the drone is clear of obstacles and people before taking off.

Step 6: Take Off

To take off with your DJI FPV drone, gently push the left joystick upwards until the drone starts to lift off the ground. Use the right joystick to control the direction and altitude of the drone. Once the drone is in the air, you can start exploring the skies and capturing stunning footage.


Taking off with your DJI FPV drone is a simple process that can be completed in just a few steps. By following the steps outlined in this article, you can ensure that your drone is taking off safely and properly and that it is always ready for your next flight.

It is important to remember that the DJI FPV is a powerful tool that should be used responsibly. Always follow the manufacturer’s instructions and guidelines when flying your drone, and be aware of the local regulations regarding drone flights in your area.

Rate this post

Leave a Comment